How World War II Affected Women in Canada essays

How World War II Affected Women in Canada essays World War II had a significant impact on most of the countries. Although Canada was not attacked, the war had an enormous impact on Canada. Because the men were sent out of the country to fight the war, the condition of women who were left alone at home, were noticeable. The war affected women in many different ways. Watching Bye Bye Blues made it clear to me that the World War II changed the lives and the social status of Women had to face many hardships in Canada during the war. The principle role of women at that time was as wives and mothers. However, because the men were not at home at the wartime, women had to be the head of the family. They had to not only take care of the family but also work to fulfill the needs of the family. People, who thought that women were supposed to stay at home and raise the children, didnt like the women going out to work. At that time in Canada, there werent many jobs for women. Women of the middle-class or lower-class had limited choices for good job, because it required good education and skills to get higher level jobs. Many women at that time worked as sales clerks and telephone operators. Many of them had to learn new skills to get the work. They were normally paid poorly. They had a hard time getting used to the new situation of handling everything by themselves. They had to work hard to survive. In the movie Bye Bye Blues, Daisy, the main character shows how the women like her in Canada had to live to survive the situation. Daisy has to work hard to make her position in the band. Working hard to get money and taking care of children at the same time require lots of hard work and determination. The lives of many women at that time were very lonely as they had to live without their husbands or brothers. The whole responsibility of raising the family was on them. ...

Ethical Issues in Packaging Practices Research Paper

Ethical Issues in Packaging Practices - Research Paper Example Ethical issues arise when businesses use unfair or deceptive practices while advertising, packaging, promotion, pricing, and distribution among other activities. However, the concern of this paper is the ethical issues in packaging practices. The paper will begin by discussing what is packaging and its purpose. It will also discuss the practices involved in packaging such as labeling and the regulations in place concerning packaging and labeling of containers. The paper will also discuss what ethics is and the ethical issues involved in packaging as well as how they can be dealt with for businesses to be ethically responsible. Being ethical can save the business costs associated with suits and also improve on its sales revenue, brand and company image and royalty. Packaging is the process of design, evaluation, and production of packages to protect products for distribution, storage, sale and use (Boone & Kurtz, 2012). Packaging products enables them to be transported easily to vario us market segments without any harm. Packages in this sense offer physical protection to products such as protection from shock and vibration. It also protects products from water and dust among other harmful effects. Some containers are designed in such a way as to extend the shelf life of products and also ensure products remain fresh, clean, and safe. Another purpose of packaging according to Shimp (2007), is to transmit information to consumers through labeling. This ensures consumers are aware of the contents that make up the product, product quality and quantity, how to use the product, and how to dispose off the package after use. There is also government requirement that consumers be made aware of the side effects of consuming certain products such as drugs, alcohol, cigarettes, and other items hence packaging offers this service to consumers allowing them to make informed choices. This is especially so in an era where cases of child obesity are on the increase and people mo re aware of the need to reduce cholesterol intake and to eat healthy foods. Packaging is used by companies as a way of advertising products. When designing packages, manufacturers therefore take into consideration the needs of clients and the target markets. However, while taking advertising into consideration, laws and regulations in place are supposed to be adhered to avoid lawsuits (Padilla, 2004). Packages also are used for containment of products for efficiency especially by grouping small items together. Items such as liquids and powder are also easily contained in a package. This also enables apportionment of the items into small quantities for convenience in distribution. Packaging enables goods to be secured especially for shipment whereby a seal is inserted to avoid theft. Packaging is therefore a very important activity for businesses as it directly affects sales hence should be handled with care. The government and other agencies are keen on packaging practices to ensure ethical standards are maintained and that consumers get value for their money without being deceived. Ethics is a term commonly used in every aspect of our lives as it determines the behavior of individuals and firms in the market. However, it is also a controversial term as it depends on people’s perception of what is right or wrong or moral; what is considered

Global Operations Management Essay Example | Topics and Well Written Essays - 1500 words

Global Operations Management - Essay Example For a manufacturing company like PPQ Parts Manufacturing Company software enabled supply chain management is the most needed for sustainability in the industry. Materials Requirement Planning For managing the inventory which is needed for the producing the end product materials requirement planning is needed, which is mainly software based in the companies in these days. It is required to maintain the right level of inventory; company should make sure that there is no shortage of raw materials or no excessive materials (Chase et al, 2006, p.675-676). A manufacturing company should be more focused in this area to increase efficiency of business. Capacity Requirement Planning Capacity requirements planning is the process of evaluating that the company can meet the current need and projected need of production with the installed capacity or not. If there is need for additional capacity then the concerned authority takes the remedies (Heim and Compton, p.209). For a manufacturing company like PPQ Parts periodical analysis is necessary and this would be more effective if software tool is used for assistance. Enterprise Resource Planning Enterprise Resource Planning is a system which integrates the departments of an organization to make the management system more effective. For a manufacturing company it is needed to improve the efficiency of the work process which includes management of production, sales management and the financial affairs of the company (Leon, 2007, p.14). Pros and cons of the Software Systems To effectively manage the process of the organization the management of the company should take help of a software system instead of doing it manually. The management should take care that the software product is best for their organization which depends on many factors like the size of the organization, the cost of the software product, the user-friendliness of the product and the compatibility of the product with the current systems. PPQ parts manufacturin g company wants a software package to make efficient their overall process. To suggest efficient software package the factors which are necessary for an analyst are the size of the firm, the employees working in the company, how many users would use the software directly, which information are not given. The six software systems selected by the analyst and their pros and cons are as follows: Software Cost Compatibility with Current Systems Functionality User-Friendliness Other Factors Remarks Intuitive (Consona) Average. The system used is Microsoft .Net and database is SQL server 2003 Administration and installation much easier (as .Net used). Simple process in the ERP package. Easy to use. Efficient Business Intelligence. 10% MS Access used. Internet compatibility outside the server environment requires MS terminal Server and Advanced Configurator Efficient but cost may be higher for some companies SAP Business One (SAP) Per User Licensing Model ($20000 for 5 users). Depend upon c ustomization Compatible with basic systems Provide accurate information, help to take

Gross Domestic Product, its importance, calculation and other basics Essay Example for Free

Gross Domestic Product, its importance, calculation and other basics Essay Gross domestic product is a term used in macroeconomics to measure the total of finished goods and services produced in a country during a period usually a year. Those things which are produced in the country are counted in GDP. Things like remittance and other things which are earned from other countries are not taken into consideration while calculating GDP. It is the most important indicator which tells about the economy of a country. It incorporates several other indicators as well like retail sales, personal consumptions, etc. II. Body A. Four parts that make up Gross Domestic Product The main components of GDP are consumption, investment accounts, spending and net exports. GDP can be calculated in three different approaches, product approach, expenditure approach and income approach. Product approach is considered to be the most direct approach in which all outputs are summed up. While the expenditure approach follows this equation: GDP = C+I+S+NE. The assumption made in this equation is that all organizations produce things or services which can be consumed by the users and is a source of investment for the organization. This equation also implies that the organization follow the supply and demand trends in the market. The income approach implies the principle that the income of the producers must be equal to that of their products. †¢ Consumption Consumption is the purchase of goods or services by the consumers. Consumption can be of three types, durable goods, non durable goods and services. Durable goods are those good which last for a long time. They are also considered as consumer investments even. Those goods which come under the head of durable goods are automobiles, refrigerator, etc. These types of goods are bought with the intention of retaining them for a long time thus are known as durable goods. Non durable goods are those goods which have a comparatively short life time than that of durable goods. They could be newspapers, grocery, etc. Services are intangible things. Things which can be classified as a service are medical treatment, teaching, etc. †¢ Investment accounts Investment is the purchase of purchase of things which are used in the production. They can also be classified into three group, business investment, residential construction and inventories. Anything that helps in the process of production comes under business investment. For example, machinery, office, plant, etc. It is the gross amount of investment that counts. Basically it subtracts the depreciation value from the value of the asset. Those assets which are replaced with the new ones, if they don’t produce any improvement in the outputs then they contribute nothing in addition to the country’s economy. Residential construction relates to the building of new houses in a period (year). Those houses which are already been constructed and are held for resale have already contributed in the GDP thus they won’t be included again. Inventories are stocked in anticipation of future sales. Changes in inventories contribute or affect the economy of a country. They are considered to be a small part that contributes to the GDP but changes in them can have great changes in the economy. For example when the inventory level increases the desired level then there may be a slowdown and producers might reduce their outputs. †¢ Government spending The government spending relates to all the items the government spends on with exception of interest paid on the debts and government transfers. Government spending mostly includes those items which are rarely sold in the market like space shuttles, aircrafts, etc. These items bear a large price that is why government pays for them (Kaplan). †¢ Net exports A net export is the difference between the total exports and imports of a country. When the exports exceed the imports, it is known as surplus export. While export deficit occurs when the imports increase from the export and when both export and import are equal it is a trade balance (Barnaby). B. Cross-border comparison As different countries have different currencies it is difficult to compare the GDPs in the respective countries currencies. For example comparing GDP of US in dollars with the GDP of India in Rupees would give a false reflection and therefore in order to have a correct comparison they are converted into national currency through current exchange rate or by purchasing power parity. †¢ Current currency exchange rates Current exchange rates are the international rates of the currency. It gives a better indication of the country’s international purchasing power and its growth. †¢ Purchasing power parity exchange rates Purchasing power parity exchange rates are those in which currency is purchasing power parity compared with that of a standard one which is usually US dollars. Non traded goods usually make use of this method rather than current currency exchange rate. It relates to prices of particular goods in the country and abroad. Therefore it can be misleading while considering the comparison of GDPs of countries due to different inflation rates, depreciation rate, etc. Mostly those countries which are less developed make use of this method to compare their GDPs. Therefore it differentiates between the high and low income countries and doesn’t forms a just comparison. C. Standards of living and GDP Standard of living can be calculated through a per capita GDP approach. There are advantages and disadvantages of calculating standard of living this way. As most of the countries on quarterly basis provide information to the authorities for calculating GDP, trends can be spotted through them on a regular basis. Most of the indicators used in GDP are widely used by other countries even therefore comparison becomes easy. The calculation of GDP is done on yearly basis that means it gives a consistent way. GDP per capita is not a very good way of calculating standard of living as it varies due to several reasons which GDP per capita might not take into account. For example a country with high exports and almost no imports would have a high GDP but a poor standard of living. Therefore GDP per capita should not be considered as the main indicator of standard of living, but just a way to it. As the standard of living increase, GDP per capita also increases. III. Conclusion To assess the effectiveness of a country’s economy GDP is widely used. But using GDP to calculate the standard of living proved a limited result. GDP does not take the wealth distribution into account which might mislead while judging the economy of a country. It doesn’t account for the inequality of the wealth. All those activities which do not occur through a market are excluded by GDP. All those activities which are free or as a volunteer are counted amongst those activities. Not counting these activities would be an understatement in the GDP. Even if the services are provided for free but there must have been a cost to provide the services. Therefore if they don’t contribute toward the GDP most of the organization would move towards free services rather than providing them on money. Another form of understatement of GDP is when those transactions which are illegal or tax avoiding activities are not taken into account. Barter system is also ignored in the calculation of GDP. Barter system is a very common system followed nowadays even through which people might exchange goods or services without any dealing of money. The improvement in products and quality are even those amongst the ignored items in GDP which does not reflect the real economic growth of a country. Computers have become more advanced but less expensive GDP will treat them as the old computers used in the past, rather than considering its worth. GDP rakes into account few things which should not be taken like the cost of rebuilding after an earthquake which might boost the GDP but would provide an unrealistic way to judge the country’s economic growth. Only those things which are economically ‘good’ are reflected in the calculation of GDP while the bad ones are excluded. All those negative effects to the environment which might be due to the production are ignored which is a bias way. Some of the things are sometimes included in GDP like cleaning up of oil spills and etc. GDP does not project the economy of a country but it just measures the economic activity. Therefore it cannot calculate the sustainable growth of a country. There are several ways a country can achieve a high GDP for a time being, for example by excessive use of natural resources, etc. But it can be very costly to pay back after if the natural resources are used badly (mistreated). As value of money changes with time comparing or determining the growth in different sorts of goods can be a difficult task to perform. While comparison of a country’s economy is done by other countries they can give inaccurate results as they might not take the local differences like change in quality, content, etc not into account which might not be a just form of judgment. There are many other limitations of using GDP to judge the economy of a country (Jackson,p63). Although GDP is a way to measure the market value of a country’s finished goods and services it should not be the key indicator to provide information about a country’s economy. It gives a rather flawed and biased way to compare things domestically as well as internationally. A country’s economy should be judged on its ability to provide the people of the country with what they need and what their basic necessities are, some of the basic necessities might include food, shelter, clothing, better place to live in, etc. Therefore things which are not included in the judging the standard of living should be considered. With a combination of indicators which can judge the conditions of the country environmentally as well as in terms of living and financial ways should be used as a way to judge the effectiveness of a country should be taken into consideration rather than just the use of GDP. Word Cited Page Barnaby, Meins. How the GDP is calculated and what it does not count. 2010, 5 May 2010, http://www. helium. com/items/1284362-the-gdp-how-the-gdp-is-calculated-and-what-it-does-not-count Jackson, Tim. Prosperity without Growth: Economics for a Finite Planet, Earthscan Publications Ltd. 1 edition, 2009 Kaplan, Jay, Components of GDP. 1999, 5 May 2010, http://www. colorado. edu/Economics/courses/econ2020/se

Essays --

System approach is a process of considering how different parts of the whole structure influence and integrate with each other and viewing problems in a system as affecting the system overall (Dreachslin, Gilbert, & Malone, 2013). According to Curtis, Dreachslin, and Sinioris (2007), the systems approach requires several steps, and these steps are to determine diversity and cultural competence goals in the context of strategy, measure current performance against needs, design training to address the gap, implement the training, assess training effectiveness, and strive for continuous improvement. Providing patient centered care has been the focus of recent organizational restructuring and quality improvement efforts in healthcare (Lutz & Bower, 2000). In healthcare literature, providing a patient centered care is to provide care and to meet patients’ needs. To provide a patient centered care, it is essential to understand the patient as a unique individual. It also important to be able to explore the patient’s experience of illness and finding common ground regarding treatment through shared decision making (Lutz & Bower, 2000). Given the first patient scenario, as a healthcare provider, it is essential for nurses to tailor our approaches to care for this patient. For this specific ethnicity, being overweight is seen as positive, and their traditional cuisine is rich of carbohydrates and sweets (Caballero & Tenzer, 2007). To provide best care for Mr. Garcia, it is best to provide a Spanish speaking nurse if possible, or an interpreter. It is important to educate Mr. Garcia regarding diet changes, for example, exchanging their simple flour tortilla to corn tortilla or pouring off excess grease after cooking. Increasing physical... ...n, gender, sexual orientation, and ability (Dayer-Berenson,2012). According to Goldsmith (2000), cultural competence does not require that patients be treated by using the same methods used in their country of origin. However, cultural competency does create a compelling case for understanding the different ways patients act in a clinical setting and for communicating with patients to ensure the best possible clinical outcome. Both patient-centered care and cultural competence aim to improve health care quality. As health-care workers we are held to the highest moral and ethical codes. Patients trust their lives in our hands. To live up to this trust we have to be respectful and compassionate, knowledgeable and understanding. Respect, dignity, knowledge, and patience are required to gain mutual trust in every relationship especially patient and doctor relationships.

Cinematography in Lawrence of Arabia Essay

Said to be one of the greatest films of all time, Lawrence of Arabia, a 222-minute movie directed by David Lean released in1962, achieved numerous accolades from popular award-giving bodies, among them the award for Best Cinematography. Through its cinematography, the desert was transformed into a character and major motivator of the film’s narrative, which was achieved through numerous ways. In the initial portions of the film, the desert was featured as calm, quiet, vast, mysterious and beautiful, which was why Lawrence expressed much excitement towards his assignment as an English army soldier. The extraordinary shots of the desert sunrise, and the extreme long shots of Lawrence (and his army) with the desert as its backdrop were breathtaking as they seemed like still photos from postcards. Pan shots from left to right denoted their journey, which were all skillfully captured on film. As the movie further unfolds, however, the desert assumes a different character as it shows its less appealing side – how it can be harsh, ruthless and merciless, without giving much preference to who or what it desires to take. This is shown during the times when Lawrence and the soldiers are having difficulties crossing the desert without water supply, and when one of Lawrence’s helpers is taken under a quicksand. Despite the bleakness of the circumstances, the sequences were still deftly shot and presented to the viewer. And then again, it changes further later on when it becomes the venue for bloodshed, as Lawrence stages wars and succeeds in conquering more territories. In some way, the desert seems like the love interest of the main character in the film because quite noticeably, there are no female characters in the film’s entirety. It was also expressed by Lawrence himself that he liked the desert because it was clean. Somehow, it seemed like Lawrence saw the desert as directly contrasting his character because although his actions may have been glorified by the Arabs, Lawrence knew that he was just a pawn in the power play of those who were in authority. The desert provided Lawrence a way to be a hero for others, which is the rationale for his decisions to go into battle.

Financial Analysis of Heidelberg Cement, Bd - 11754 Words

Chapter-1: Introduction Chittagong Cement Factory one of the pioneer cement industries in the country was established in 1966 and was placed under control and management of Bangladesh Mineral Oil and Gas Corporation and subsequently of BMEDC. The factory was converted into and incorporated as a private limited company on 30 June 1979. Thereafter the company converted into a public limited company in February 1989 with the shareholding of 51% by Bangladesh Chemical Industries Corporation (BCIC), 34% by General Public and 15% by officers, staff and workers of the company. Under the privatization policy of the Government, BCIC sold and transferred its 51% shares to Local investors on 27 June 1993. HCBL is subsidiary of HeidelbergCement†¦show more content†¦To capture the uncertain future, a scenario analysis has been prepared. The growth rate of turnover, dividend under Gordon Model and retention method, sustainable growth rate of sales and the GDP growth rate were taken under consideration with an obvious choice of practicable growth rate. Plug variable was ascertained based on the debt: equity ratio to specify the projection like dividend policy and/or capital structure policy. 1.3 Methodology Analysis Technique Balance sheet analysis, cash flow analysis, ratio analysis of Heidelberg Cement Bangladesh Ltd.has been performed for a period of six years and pictorial representation such as bar charts, trend lines are used to present the results and interpret effectively. Furthermore, Microsoft Excel has been used for forecasting the future stock price under different growth models by the help of current and past data. To capture the uncertain future scenario analysis has been performed. Nature and Sources of Data The financial analysis of Heidelberg Cement Bangladesh Ltd. is performed by using secondary data only. Annual Reports from year 2003-2008 are collected from Dhaka Stock Exchange and also data from websites of Dhaka Stock Exchange (dsebd.com), Heidelberg Cement Bangladesh Ltd., newspapers are conferred with while analyzing the financial position and finding various news related to the firm. Secondary Data of recent 6 years are utilized in this study forShow MoreRelatedFsav Lafarge Essay3729 Words   |  15 Pages| Financial Statement analysis and ValuationHeidelberg Cement Bangladesh Limited | | 7/22/14 | F401 | | ------------------------------------------------- Course Instruction Financial Statement Analysis and Valuation F-401 ------------------------------------------------- Submitted to Dr. Mahmood Osman Imam Professor Department of Finance University of Dhaka ------------------------------------------------- Submitted by Md. Faraz Hassan 17-026 ------------------------------------------------- Read MoreReport on Lafarge Surma Cement10084 Words   |  41 PagesPart 1 Analysis of Financial Statement Computation of Financial ratio 1. Common size statements 2. Internal liquidity (solvency) 3. Operating performance a. Operating efficiency b. Operating profitability 4. Risk analysis a. Business risk b. Financial risk 5. Growth analysis †¢ Determinants of Growth Part 2 Industry Analysis 1. Cross-Sectional Industry performance 2. performance over time 3. Performance of companies within an industry 4. Performance Analysis ProcessRead MoreMarketing of Food Beverage Products- a Study on Akij Group10620 Words   |  43 PagesObjectives 5 1.3 Scope 5 1.4 Methodology 5 1.5 Limitation 6 2.0 Company Profile 7 Mission, Vision, Goal and Objective 7 2.2 Akij Group 8 2.3 Akij Jute Mills Ltd. 9 2.4 Akij Match Factory Ltd. 9 2.5 Akij Food Baverage Ltd. 10 2.6 Akij Cement Company Ltd. 11 2.7 Dhaka Tobacco Industries 11 2.8 Akij Textile Mills Ltd. 9 2.9 Akij Particle Board Mills Ltd 10 2.10 Akij Printing Packaging Ltd. 11 2.11 Akij Corporation Limited 11 Product profile 17 Segmentation Target Market 19Read MoreQuality Improvement328284 Words   |  1314 Pagesof Mechanical Engineering, and was Director of the Program in Industrial Engineering. Dr. Montgomery has research and teaching interests in engineering statistics including statistical quality-control techniques, design of experiments, regression analysis and empirical model building, and the application of operations research methodology to problems in manufacturing systems. He has authored and coauthored more than 190 technical papers in these fields and is the author of twelve other books. Dr.